IF CD is not automatically displayed on screen:
    Click START, select RUN, type d:/index.htm and click OK
    ** Please note: where I put "d:" this is the letter for your CD-ROM.  Your letter 
    may be different, please insert the letter for your CD-ROM drive**
    
   
               
         
               
   TO DOWNLOAD AUTOCAD DRAWINGS:
    **Browsers do not recognize AutoCad extensions.  To show an AutoCad 
    drawing you must do the following:

     Using Internet Explorer
    -Establish a folder on your hard drive to store the drawings
    -Right click on desired drawing
    -Click on "SAVE TARGET AS" from pop-up window 
     -Save to established folder
    -Open AutoCad program
    -Open file
    -Go to desired folder you established
    -Click on drawing file you saved
    -In AutoCad program, look at "Files of Type" at the bottom of the dialog box
    -Click the drop down menu and click on the DXF file extension
    -Your DXF drawing should appear
    -Click "Open", your drawing should appear, if it doesn't review Hidden Files
      below 

    Using NetScape
    -Establish a folder on your hard drive to store the drawings
    -Right click on desired drawing
    -Select "SAVE LINK AS" from pop-up window 
    -The Save AS window will display
    -Click the drop down arrow at the far right of the SAVE IN box
    -Select the drive and folder you wish to deposit these drawings into
    -The Saving Location window closes automatically when the file finishes 
      downloading.
    -Open AutoCad program
    -Open file
    -Go to desired folder you established
    -Click on drawing file you saved and wish to review
    -In AutoCad program, look at "Files of Type" at the bottom of the dialog box
    -Click the drop down menu and click on the DXF file extension
    -Your DXF drawing should appear, if it doesn't review Hidden Files
      below 
    
     HIDDEN FILES:
     Windows 2000 - (and most other operating systems)
    -Go to My Computer
    -Control Panel
    -Folder options
    -View
    -Open Hidden files and folders
    -click on "show hidden files and folders"
    -click "apply"
    -click "OK"
    
    This should allow the CD files to show correctly on your computer and to allow
    the AutoCad drawings to show in the AutoCad program.      
               

To Contact Us:

Phone:  480.756.6675
Fax:  480.756.6679
Sales@Nescomfg.com

Nesco Manufacturing, Inc.
1510 West Drake Tempe, AZ  85283

 Nesco Manufacturing, Inc. website designed and maintained by Site Solutions.
Email our webmaster with any questions or comments regarding this site.
Mail To:  webmaster@sitesolutions.nu
copyright © 1999-2007 - All rights reserved